Service hotline021-51602111
Stainless steel air operated gas regulator ATY52
Stainless steel air operated gas regulator ATY52

Stainless steel air operated gas regulator ATY52

Pressure Regulating Valves is dedicated to R&D of pressure regulating valve control system, With 12 years of R&D and manufacturing of stainless Steel Gas Regulators,Stainless steel air operated gas regulator etc. Products of products manufacturer. Stable product quality, Constant improvement, Well reputed; Reliable after-sales service.

The air-operated gas regulator adjusts downstream pressure by controlling the compressed air pressure, controlling the downstream fluid pressure. Pressure can be set anywhere within the adjusting range, continuous control, achieving continuous, stepless downstream pressure regulation, supports remote, pneumatic and other control modes, downstream pressure is controlled by air pressure, may be equal, or varied at a set ratio, air control ratio 1: 1 to 1:100. Pneumatically controlled gas regulators are suitable for applications where fluid pressure requires remote or precise control.


  • Manual control
    Manual control

Design FeaturesDesign features

● Single-stage pressure reducing structure.

● Body and diaphragm adopts hard sealed type.

Body Thread: 1/4"NPT(F).

● Built-in filter screen.

● Panel or wall mounting available.

● Can be controlled remotely, and other control modes including pneumatic control.

● Compressed air pressure 0-7bar.

● Sensitive operation, high precision.

SpecificationsCharacteristic parameters

Max. Inlet Pressure: 500, 1500, 3000psig
Outlet Pressure: 0~15, 0~25, 0~50, 0~100, 0~250psig
Safety Test Pressure: 1.5 times of max. Inlet pressure
Temperature Range: -40℃ to +100℃(above 100℃ consult technical)
Leak rate: 2×10-8 atm cc/sec He
Cv value: 0.06, 0.08, 0.2, 0.6
➣ air control ratio 1:1 to 1:100
➣ linearity: Within ±5% F.S
➣ sensitivity: Within ±3% F.S
➣ accuracy: Within ±5% F.S

Product materialProduct material

Body: 316L, 304, Brass, C276, TA2, Monel 400, stainless steel pTFE-lined
Bonnet: 304
Diaphragm: 316L, C276
Filter Screen: 316L(10μm)
Valve Seat: PCTFE, PTFE, PEEK, Vespel
Spring: 316L
Plug Stem: 316L

Flow Curve ChartFlow curve

Flow Curve Chart

Installation Dimension DrawingInstallation dimensions


Body port layout drawingMatrix bitmap

Installation Dimension Drawing


Ordering GuideORDERING INFORMATION
Series models Body material Body port layout Inlet Pressure Outlet Pressure Pressure Gauges Inlet gas type Outlet gas type Options
ATY52 air operated gas regulator
L B D F G  OO OO P
L:316L
S:C276
B:Brass
C:C276
T:TA2
M:Monel
CF: PTFE-lined
A
B
D
G
J
M
D:3000psig
E:1500psig
F:500psig
G:0-250psig
I:0-100psig
K:0-50psig
L:0-25psig
M:0-15psig
Q:30"Hg Vac-30psig
S:30"Hg Vac-60psig
T:30"Hg Vac-100psig
U:30"Hg Vac-200psig
G: With pressure gauge
(Mpa)
P: With pressure gauge
(psig/bar)
W: Without pressure gauge
00:1/4NPT(F)
01:1/4NPT(M)
23:CGA330
24:CGA350
27:CGA580
28:CGA660
30:CGA590
52:G5/8-RH(F)
63:W21.8-14RH(F)
64:W21.8-14LH(F)
Other fittings available
00:1/4NPT(F)
01:1/4NPT(M)
10:1/8 tube fitting
11:1/4 tube fitting
12:3/8 tube fitting
15:6mm tube fitting
16:8mm tube fitting
74:M8*1-RH(M)
Other fittings available
P: Panel-mount mounting
R:Safety Valves
N: Needle valve
D:Diaphragm Valves
R:Relief Valves
ZR: Self-venting
SR: Self-relieving with recovery port