Service hotline021-51602111
Stainless steel electric gas regulator ETY52
Stainless steel electric gas regulator ETY52

Stainless steel electric gas regulator ETY52

Pressure Regulating Valves is dedicated to R&D of pressure regulating valve control system, With 12 years of R&D and manufacturing of stainless Steel Gas Regulators,Stainless steel electric gas regulator etc. Products of products manufacturer. Stable product quality, Constant improvement, Well reputed; Reliable after-sales service.

ElectricGas RegulatorsConsists of a linear electric actuator and a low-resistance straight single-seat valve body; The actuator is an integrated electronic structure, with built-in servo amplifier, remote control possible, computer control, a control signal (4-20mA DC or 0-5VDC) plus the power supply sets the valve opening, Achieves regulation of pressure and flow parameters. Features sensitive operation, simple wiring, high flow capacity, compact size and high regulation accuracy.


  • Pilot gas regulator
    Pilot gas regulator

Design FeaturesDesign features

● Single-stage pressure reducing structure.

● Body and diaphragm adopts hard sealed type.

Body Thread: 1/4"NPT(F).

● Built-in filter screen.

● Panel or wall mounting available.

● Can be controlled remotely, and other control modes including pneumatic control.

● Sensitive operation, high precision.

SpecificationsCharacteristic parameters

Max. Inlet Pressure: 500, 1500, 3000psig
Outlet Pressure: 0~15, 0~25, 0~50, 0~100, 0~250psig
Safety Test Pressure: 1.5 times of max. Inlet pressure
Temperature Range: -40℃ to +100℃(above 100℃ consult technical)
Leak rate: 2×10-8 atm cc/sec He
Cv value: 0.06, 0.08, 0.2, 0.6
Voltage: AC24V and DC24V
Input signal: 0-5mA, 0-10mA4-20mA

Product materialProduct material

Body: 316L, 304, Brass, C276, TA2, Monel 400, stainless steel pTFE-lined
Bonnet: 304
Diaphragm: 316L, C276
Filter Screen: 316L(10μm)
Valve Seat: PCTFE, PTFE, PEEK, Vespel
Spring: 316L
Plug Stem: 316L

Flow Curve ChartFlow curve

Flow Curve Chart

Installation Dimension DrawingInstallation dimensions


Body port layout drawingMatrix bitmap

Installation Dimension Drawing


Ordering Guide ORDERING INFORMATION
Series modelsBody materialBody port layoutInlet PressureOutlet PressurePressure GaugesInlet gas typeOutlet gas typeOptions
ETY52 electric gas regulator
LBDFG OOOOP
L:316L
S:C276
B:Brass
C:C276
T:TA2
M:Monel
CF: PTFE-lined
A
B
D
G
J
M
D:3000psig
E:1500psig
F:500psig
G:0-250psig
I:0-100psig
K:0-50psig
L:0-25psig
M:0-15psig
Q:30"Hg Vac-30psig
S:30"Hg Vac-60psig
T:30"Hg Vac-100psig
U:30"Hg Vac-200psig
G: With pressure gauge
(Mpa)
P: With pressure gauge
(psig/bar)
W: Without pressure gauge
00:1/4NPT(F)
01:1/4NPT(M)
23:CGA330
24:CGA350
27:CGA580
28:CGA660
30:CGA590
52:G5/8-RH(F)
63:W21.8-14RH(F)
64:W21.8-14LH(F)
Other fittings available
00:1/4NPT(F)
01:1/4NPT(M)
10:1/8 tube fitting
11:1/4 tube fitting
12:3/8 tube fitting
15:6mm tube fitting
16:8mm tube fitting
74:M8*1-RH(M)
Other fittings available
P: Panel-mount mounting
R:Safety Valves
N: Needle valve
D:Diaphragm Valves
R:Relief Valves
ZR: Self-venting
SR: Self-relieving with recovery port