Service hotline021-51602111
Stainless steel pilot gas regulator XTY11
Stainless steel pilot gas regulator XTY11

Stainless steel pilot gas regulator XTY11

Stainless steel pilot gas regulator XTY11(welded, air, G5/8): Stainless steel pilot gas regulator, For stainless Steel Gas Regulators, choose SHZDH. Experience in pressure-regulating valve products, One-to-one guidance, European and American technology,Withstands low temperatures down to -190℃, 1-year warranty, 15-day replacement guarantee,Traceable material supply, Extremely low leak rate,Overlay-welded plug construction

PilotGas RegulatorsControls the main valve downstream pressure by adjusting the pilot reducer output pressure, pressure can be set anywhere within the adjusting range, continuous control, achieving continuous, stepless downstream pressure regulation, supports remote, pneumatic and other control modes, downstream pressure is controlled by the reducing valve output pressure, may be equal, or varied at a set ratio, air control ratio 1: 1 to 1:100. Pilot-operated gas regulators are suitable for applications where fluid pressure requires remote or precise control.


  • Pilot control
    Pilot control

Main featuresMAin features

●Body and diaphragm adopts hard sealed type.

Body Thread: 1/4"NPT(F), 3/8"NPT(F).

● Panel or wall mounting available.

● Can be controlled remotely, and other control modes including pneumatic control.

● Compressed air pressure 0-7bar.

● Sensitive operation, high precision, multiple pilot reducing valves available.

SpecificationsCharacteristic parameters

Max. Inlet Pressure: 500, 3000psig
Outlet Pressure: 0~25, 0~50, 0~100, 0~250, 0~500, 0~750psig
Safety Test Pressure: 1.5 times of max. Inlet pressure
Temperature Range: -40℃ to +100℃(above 100℃ consult technical)
Cv value: 0.06, 0.08, 0.12, 0.2
➣ air control ratio 1:1 to 1:100
➣ linearity: Within ±5% F.S
➣ sensitivity: Within ±3% F.S
➣ accuracy: Within ±5% F.S

Product materialProduct material

Body: 316L, Brass, C276, TA2, Monel 400, stainless steel pTFE-lined
Bonnet: 304
Diaphragm: 316LC276
Filter Screen: 316L(10μm)
Valve Seat: PCTFE, PTFE, PEEK, Vespel
Spring: 316L
Plug Stem: 316L

Flow Curve ChartFlow curve

Flow Curve Chart

Installation Dimension DrawingInstallation dimensions

Installation Dimension Drawing

Body port layout drawingMatrix bitmap

Body port layout drawing


Ordering GuideORDERING INFORMATION
Series models Body material Body port layout Inlet Pressure Outlet Pressure Pressure Gauges Inlet gas type Outlet gas type Options
XTY11 pilot gas regulator L B D F G  OO OO P
L:316L
B:Brass
C:C276
T:TA2
M:Monel
CF: PTFE-lined
A
B
D
G
J
M
D:3000psig
F:500psig
E:0-750psig
F:0-500psig
G:0-250psig
I:0-100psig
K:0-50psig
L:0-25psig
Q:30"Hg Vac-30psig
S:30"Hg Vac-60psig
T:30"Hg Vac-100psig
U:30"Hg Vac-200psig
G: With pressure gauge
 (Mpa)
P: With pressure gauge
(psig/bar)
W: Without pressure gauge
00:1/4NPT(F)
01:1/4NPT(M)
23:CGA330
24:CGA350
27:CGA580
28:CGA660
30:CGA590
52:G5/8-RH(F)
63:W21.8-14RH(F)
64:W21.8-14LH(F)
91:1/4"VCR(F)
92:1/4"VCR(M)
93:1/4" welded tube
Other fitting types available
00:1/4NPT(F)
01:1/4NPT(M)
10:1/8 tube fitting
11:1/4 tube fitting
12:3/8 tube fitting
15:6mm tube fitting
16:8mm tube fitting
74:M8*1-RH(M)
91:1/4"VCR(F)
92:1/4"VCR(M)
93:1/4" welded tube
Other fitting types available
P: Panel-mount mounting
R:Safety Valves
N: Needle valve
D:Diaphragm Valves
ZR: Self-venting
SR: Self-relieving with recovery port