PilotGas RegulatorsControls the main valve downstream pressure by adjusting the pilot reducer output pressure, pressure can be set anywhere within the adjusting range, continuous control, achieving continuous, stepless downstream pressure regulation, supports remote, pneumatic and other control modes, downstream pressure is controlled by the reducing valve output pressure, may be equal, or varied at a set ratio, air control ratio 1: 1 to 1:100. Pilot-operated gas regulators are suitable for applications where fluid pressure requires remote or precise control.
●Body and diaphragm adopts hard sealed type.
Body Thread: 3/8"NPT(F), 1/2"NPT(F)
● Panel or wall mounting available.
● Can be controlled remotely, and other control modes including pneumatic control.
●compressed air pressure 0-7bar.
●Sensitive operation, high precision.
●multiple pilot reducing valves available.
| Max. Inlet Pressure: 500, 3000psig | |
| Outlet Pressure: 0～25, 0～50, 0～100, 0~125, 0～250, 0~400psig | |
| Safety Test Pressure: 1.5 times of max. Inlet pressure | |
| Temperature Range: -40℃ to ＋100℃(above 100℃ consult technical) | |
| Leak rate: 2×10-8atmcc/secHe | |
| Cv value: 0.6, 1.2 | |
| ➣ air control ratio 1:1 to 1:100 | |
| ➣ linearity: Within ±5% F.S | |
| ➣ sensitivity: Within ±3% F.S | |
| ➣ accuracy: Within ±5% F.S |
| Body: 316L, Brass, C276, TA2, Monel 400, stainless steel pTFE-lined |
| Bonnet: 304 |
| Diaphragm: 316LC276 |
| Filter Screen: 316L(10μm) |
| Valve Seat: PTFE, PEEK, Vespel |
| Spring: 316L |
| Plug Stem: 316L |
| Ordering guide ORDERING INFORMATION | ||||||||
| Series models | Body material | Body port layout | Inlet Pressure | Outlet Pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options |
| L | B | D | H | G | 02 | 02 | P | |
| XTY12 pilot gas regulator |
L:316L S:304 B:Brass C:C276 T:TA2 M:Monel CF: PTFE-lined |
A B D G M |
D:3000psig F:500psig |
F:0-400psig G:0-250psig I:0-125psig K:0-100psig L:0-50psig L:0-25psig Q:30"Hg Vac-30psig S:30"Hg Vac-60psig T:30"Hg Vac-100psig U:30"Hg Vac-200psig |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
02:3/8NPT(F) 03:3/8NPT(M) 04:1/2NPT(F) 05:1/2NPT(M) 12:3/8 tube fitting 13:1/2 tube fitting 91:1/4"VCR(F) 92:1/4"VCR(M) 92:1/4" welded tube Other fittings available |
02:3/8NPT(F) 03:3/8NPT(M) 04:1/2NPT(F) 05:1/2NPT(M) 12:3/8 tube fitting 13:1/2 tube fitting 91:1/4"VCR(F) 92:1/4"VCR(M) 92:1/4" welded tube Other fittings available |
P: Panel-mount mounting R:Safety Valves ZR: Self-venting SR: Self-relieving with recovery port |
