PilotGas RegulatorsControls the main valve downstream pressure by adjusting the pilot reducer output pressure, pressure can be set anywhere within the adjusting range, continuous control, achieving continuous, stepless downstream pressure regulation, supports remote, pneumatic and other control modes, downstream pressure is controlled by the reducing valve output pressure, may be equal, or varied at a set ratio, air control ratio 1: 1 to 1:100. Pilot-operated gas regulators are suitable for applications where fluid pressure requires remote or precise control.
● Stable outlet pressure.
● For low-pressure liquid and gas lines.
●Valve body cavity and surfaces are high-precision polished.
● Meets high-cleanliness requirements such as hygiene, cleanroom and bioprocess.
Applicable Media: Gas, liquid, steam etc..
End connection type: Tri-Clamp, union thread, welded, flange.
Size: 1/4”-2”(DN6-DN50).
● Can be controlled remotely, and other control modes including pneumatic control.
● Compressed air pressure 0-7bar.
● Sensitive operation, high precision.
● Multiple pilot reducing valves available.
| Inlet Pressure: 0-200, 0-360psig |
| Outlet Pressure: 0-25, 0-50, 0-100, 0-150, 0-250psig |
| Safety Test Pressure: 1.5 times of max. Inlet pressure |
| Temperature Range: -40℃ to ＋100℃(above 100° consult technical) |
| Leak rate: Without gas leakage |
| Cv value: 0.2, 0.6, 1.2, 2.4, 3.2, 4, 5.1, 7, 11, 13, 17, 25, 30, 48 |
| ➣ air control ratio 1:1 to 1:100 |
| ➣ linearity: Within ±5% F.S |
| ➣ sensitivity: Within ±3% F.S |
| ➣ accuracy: Within ±5% F.S |
| Body: 316L, 304 |
| Bonnet: 304 |
| Valve Seat: PCTFE, PTFE, Vespel |
| ➣ Seals: PCTFE, PTFE, EPDM, FKM, VMQ(silicone rubber) |
| Plug Stem: 316L, 304 |
| Ordering GuideORDERING INFORMATION | ||||||||
| Series models | Body material | Body port layout | Inlet Pressure | Outlet Pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options |
| L | A | D | G | G | 00 | 00 | P | |
| XSR120 pilot pressure reducing valve |
L:316L S:304 |
A B J |
D:360psig E:200psig |
F:0-250psig G:0-150psig I:0-100psig K:0-50psig L:0-25psig |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
00:1/4" (clamp 50.5) 02:3/8" (clamp 50.5) 04:1/2" (clamp 50.5) 06:3/4" (clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) Other configurations available on request |
00:1/4" (clamp 50.5) 02:3/8" (clamp 50.5) 04:1/2" (clamp 50.5) 06:3/4" (clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) Other configurations available on request |
P: Panel-mount mounting |
