Electrical proportional valveGas RegulatorsAdjusts downstream pressure according to the control electric signal, controlling the downstream fluid pressure. Pressure can be set anywhere within the adjusting range, continuous control, achieving continuous, stepless downstream pressure regulation, supports remote, program, computer and PLC control, for applications requiring remote and precise pressure control, Electric proportional gas regulators are especially suitable.
● Stable outlet pressure.
● For low-pressure liquid and gas lines.
●Valve body cavity and surfaces are high-precision polished.
● Meets high-cleanliness requirements such as hygiene, cleanroom and bioprocess.
Applicable Media: Gas, liquid, steam etc..
End connection type: Tri-Clamp, union thread, welded, flange.
Size: 1/4”-2”(DN6-DN50).
● Can be controlled remotely, can be controlled by computer, PLC control
● Sensitive operation, high precision
| Inlet Pressure: 0-200, 0-360psig |
| Outlet Pressure: 0-25, 0-50, 0-100, 0-150, 0-250psig |
| Safety Test Pressure: 1.5 times of max. Inlet pressure |
| Temperature Range: -40℃ to ＋100℃(above 100° consult technical) |
| Leak rate: Without gas leakage |
| Cv value: 0.2, 0.6, 1.2, 2.4, 3.2, 4, 5.1, 7, 11, 13, 17, 25, 30, 48 |
| ➣ supply voltage: DC24V, DC12-15V |
| Input signal: DC4-20mA, DC0-20mA(aggregated), DC0-5V, DC0-10V |
| ➣ output signal: DC1-5V, DC4-20mA (sink) |
| ➣ linearity: Within ±1% F.S |
| ➣ sensitivity: Within ±0.6% F.S |
| ➣ accuracy: Within ±1% F.S |
| Body: 316L, 304 |
| Bonnet: 304 |
| Valve Seat: PCTFE, PTFE, Vespel |
| ➣ Seals: PCTFE, PTFE, EPDM, FKM, VMQ(silicone rubber) |
| Plug Stem: 316L, 304 |
| Ordering GuideORDERING INFORMATION | ||||||||
| Series models | Body material | Body port layout | Inlet Pressure | Outlet Pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options |
| L | A | D | G | G | 00 | 00 | P | |
| EASR120 electrical proportional reducing valves |
L:316L S:304 |
A B J |
D:360psig E:200psig |
F:0-250psig G:0-150psig I:0-100psig K:0-50psig L:0-25psig |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
00:1/4" (clamp 50.5) 02:3/8" (clamp 50.5) 04:1/2" (clamp 50.5) 06:3/4" (clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) Other configurations available on request |
00:1/4" (clamp 50.5) 02:3/8" (clamp 50.5) 04:1/2" (clamp 50.5) 06:3/4" (clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) Other configurations available on request |
P: Panel-mount mounting |
