SR180 series sanitary pressure reducing valves, single-stage diaphragm reducing design, Diaphragm pressure transmission, stable outlet pressure, suitable for gas, liquid and steam etc.,For hygiene, cleanroom, high-cleanliness fields such as biotechnology.
● For low-pressure liquid and gas lines.
●Valve body cavity and surfaces are high-precision polished.
● Meets high-cleanliness requirements such as hygiene, cleanroom and bioprocess.
Applicable Media: Gas, liquid, steam etc..
End connection type: Tri-Clamp, union thread, welded, flange.
Size: 1/4”-4”(DN6-DN100).
| Inlet Pressure: 0-250, 0-500, 0-1500psig |
| Outlet Pressure: 0-25, 0-50, 0-100, 0-250, 0-300psig |
| Safety Test Pressure: 1.5 times of max. Inlet pressure |
| Temperature Range: -40℃ to ＋100℃(above 100° consult technical) |
| Leak rate: Without gas leakage |
| Cv value: 0.2, 0.6, 1.2, 2.4, 3.2, 4, 5.1, 7, 11, 13, 17, 25, 30, 48 |
| Body: 316L, 304 |
| Bonnet: 304 |
| Valve Seat: PCTFE, PTFE, Vespel |
| ➣ Seals: PCTFE, PTFE, EPDM, FKM, VMQ(silicone rubber) |
| Plug Stem: 316L, 304 |
| Ordering Guide ORDERING INFORMATION | ||||||||
| Series models | Body material | Body Port holes | Inlet Pressure | Outlet Pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options |
| L | A | D | G | G | 00 | 00 | P | |
| SR180 sanitary pressure reducing valves HTSR180 high temperature reducing valves ASR180 pneumatic reducing valves XSR180 pilot pressure reducing valve LSR180 liquid reducing valves ESR180 motorized reducing valves EASR180 electrical proportional reducing valves |
L:316L S:304 |
A B J |
D:1500psig E:500psig F:250psig |
H:0-300psig G:0-250psig I:0-100psig K:0-50psig L:0-25psig |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
00: 1/4"(clamp 50.5) 02: 3/8"(clamp 50.5) 04: 1/2"(clamp 50.5) 06: 3/4"(clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) 20:3" (clamp 91) 24:3.5" (clamp 106) 28:4" (clamp 119) Other configurations available on request |
00: 1/4"(clamp 50.5) 02: 3/8"(clamp 50.5) 04: 1/2"(clamp 50.5) 06: 3/4"(clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) 20:3" (clamp 91) 24:3.5" (clamp 106) 28:4" (clamp 119) Other configurations available on request |
P: Panel-mount mounting |
