HTSR120 series sanitary high temperature reducing valves, single-stage diaphragm reducing design, Diaphragm pressure transmission, stable outlet pressure, suitable for high temperature gas and high temperature liquids, etc.,Hygiene, cleanroom, high-cleanliness fields such as biotechnology.
● Stable outlet pressure.
● For low-pressure liquid and gas lines.
●Valve body cavity and surfaces are high-precision polished.
● Meets high-cleanliness requirements such as hygiene, cleanroom and bioprocess.
Applicable Media: Gas, liquid, steam etc..
End connection type: Tri-Clamp, union thread, welded, flange.
Size: 1/4”-2”(DN6-DN50).
| Inlet Pressure: 0-200, 0-360psig |
| Outlet Pressure: 0-25, 0-50, 0-100, 0-150, 0-250psig |
| Safety Test Pressure: 1.5 times of max. Inlet pressure |
| Temperature Range: 100℃ to ＋260℃(above 260℃ consult technical) |
| Leak rate: Without gas leakage |
| Cv value: 0.2, 0.6, 1.2, 2.4, 3.2, 4, 5.1, 7, 11, 13, 17, 25, 30, 48 |
| Body: 316L, 304 |
| Bonnet: 304 |
| Valve Seat: PTFE, Vespel |
| ➣ Seals: PTFE, EPDM, FKM, VMQ(silicone rubber) |
| Plug Stem: 316L |
| Ordering GuideORDERING INFORMATION | ||||||||
| Series models | Body material | Body port layout | Inlet Pressure | Outlet Pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options |
| L | A | D | G | G | 00 | 00 | P | |
| HTSR120 high temperature reducing valves |
L:316L S:304 |
A B J |
D:360psig E:200psig |
F:0-250psig G:0-150psig I:0-100psig K:0-50psig L:0-25psig |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
00:1/4" (clamp 50.5) 02:3/8" (clamp 50.5) 04:1/2" (clamp 50.5) 06:3/4" (clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) Other configurations available on request |
00:1/4" (clamp 50.5) 02:3/8" (clamp 50.5) 04:1/2" (clamp 50.5) 06:3/4" (clamp 50.5) 08:1" (clamp 50.5) 10:1-1/4" (clamp 50.5) 12:1-1/2" (clamp 64) 14:2" (clamp 77.5) Other configurations available on request |
P: Panel-mount mounting |
