The proportional solenoid back pressure valve adjusts back pressure according to the control signal, controlling the upstream fluid pressure. Pressure can be set anywhere within the adjusting range, continuous control, achieving continuous, stepless back pressure regulation, supports remote, program, computer and PLC control, for applications requiring remote and precise pressure control, an electro-pneumatic proportional back pressure valve is recommended.
● Stable outlet pressure.
● For low-pressure liquid and gas lines.
●Valve body cavity and surfaces are high-precision polished.
● Meets high-cleanliness requirements such as hygiene, cleanroom and bioprocess.
Applicable Media: Gas, liquid, steam etc..
End connection type: Tri-Clamp, union thread, welded, flange.
Size: 1/4”-2”(DN6-DN50).
● Can be controlled remotely, can be controlled by computer, PLC control
● Sensitive operation, high precision
| ➣ control pressure: 0-25, 0-50, 0-100, 0-250, 0-360psig |
| Safety Test Pressure: 1.5 times of max. Inlet pressure |
| Temperature Range: -40℃ to ＋100℃(above 100° consult technical) |
| Leak rate: Without gas leakage |
| Cv value: 0.2, 0.6, 1.2, 2.4, 3.2, 4, 5.1, 7, 11, 13, 17, 25, 30, 48 |
| ➣ supply voltage: DC24V, DC12-15V |
| Input signal: DC4-20mA, DC0-20mA(aggregated), DC0-5V, DC0-10V |
| ➣ output signal: DC1-5V, DC4-20mA (sink) |
| ➣ linearity: Within ±1% F.S |
| ➣ sensitivity: Within ±0.6% F.S |
| ➣ accuracy: Within ±1% F.S |
| Body: 316L, 304 |
| Bonnet: 304 |
| Valve Seat: PCTFE, PTFE, Vespel |
| ➣ Seals: PCTFE, PTFE, EPDM, FKM, VMQ(silicone rubber) |
| Plug Stem: 316L, 304 |
| Ordering GuideORDERING INFORMATION | ||||||||
| Series models | Body material | Body port layout | Control pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options | |
| EASR220 proportional back pressure valve |
L | A | G | G | 00 | 00 | P | |
|
L:316L S:304 |
A B |
H:0-360psig G:0-250psig I:0-100psig K:0-50psig L:0-25psig |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
00: 1/4"(clamp 50.5) 02: 3/8"(clamp 50.5) 04: 1/2"(clamp 50.5) 06: 3/4"(clamp 50.5) 08: 1"(clamp 50.5) 10: 1- 1/4"(clamp 50.5) 12: 1-1/2"(clamp 64) 14: 2"(clamp 77.5) Other configurations available on request |
00: 1/4"(clamp 50.5) 02: 3/8"(clamp 50.5) 04: 1/2"(clamp 50.5) 06: 3/4"(clamp 50.5) 08: 1"(clamp 50.5) 10: 1- 1/4"(clamp 50.5) 12: 1-1/2"(clamp 64) 14: 2"(clamp 77.5) Other configurations available on request |
P: Panel-mount mounting | ||
