Service hotline021-51602111
Stainless steel back pressure valve WBF
Stainless steel back pressure valve WBF

Stainless steel back pressure valve WBF

Shanghai Pressure Regulating Industry Co., Ltd., integrated designer and manufacturer of back pressure valve, Stainless steel back pressure valve manufacturer, Strong technical capability, Ample spare parts, Fast repair, Fast response,Clean product, Degreasing, Easier ultrasonic cleaning!

If the flow of some pumps varies strongly with pressure, a back pressure valve can be installed at the pump outlet, keeps the pump output flow stable, in this case the back pressure valve is normally set to the pump working pressure or slightly below it. The check valve on the outlet line prevents backflow of liquid, the back pressure valve maintains a constant pressure at the pump outlet.


  • Manual control
    Manual control

  • Air operated control
    Air operated control

  • Pilot control
    Pilot control

  • Electric control
    Electric control

  • Electrical proportional model
    Electrical proportional model

Design FeaturesDesign features

● Provides a pressure differential on both sides of the back pressure valve piping

● Prevents siphoning, Eliminates dosing variations caused by pressure fluctuations at the injection point

● Used together with pulse dampers to reduce water-hammer damage to the system

● Protects piping, elbows and fittings, reduces the impact of pressure fluctuations

● Delivers its full effect only when used with other line components such as pulse dampers

SpecificationsCharacteristic parameters

➣ control pressure control range: 0-1bar, 0-3bar, 0-7bar, 0-10bar
Safety Test Pressure: 150% max. Rated pressure
Temperature Range: -40℃ to +100℃(above 100℃ consult technical)
Internal Leakage Rate: Without gas leakage
Cv value: 0.6, 1.2, 2, 2.6, 3.8, 5.1, 8, 11, 13, 17, 25, 36, 50, 75

Product materialProduct material

Valve Body: 316L, 304, C276, TA2, PVC, PVDF, PTFE, stainless steel pTFE-lined
Diaphragm: 316L, C276, PTFE, NBR, VITON, EPDM, PEEK, PTFE composite diaphragm
O-ring: NBR, VITON, EPDM, PTFE, RPTFE
Valve Seat: PTFE, PCTFE, PEEK, Vespel, 316L
Spring: 316L
Plug Stem: 316L

Body port layout drawingMatrix bitmap

Body port layout drawing


ORDERING INFORMATION
Series modelsBody materialBody port layoutNominal Diameter (DN)Connection RC/NPTControl pressureDiaphragmPressure Gauges
WBF back pressure valve
HTWBFHigh Temperature Back Pressure Valves
AWBF air operated back pressure valve
XWBF pilot back pressure valve
LWBF liquid back pressure valve
EWBF motorised back pressure valve
EAWBF proportional back pressure valve
L:316L
S:304
C:C276
T:TA2
P:PVC
PD:PVDF
PF:PTFE
CF: PTFE-lined
A
B
6  32
8   40
10   50
15   65
20   80
25   100
1/8"  1.25"
1/4"   1.5"
3/8"   2"
1/2"   2.5"
3/4"   3"
1"   4"
Flanged connection available on request, code: F
I:0-1bar
H:0-3bar
G:0-7bar
Q:0-10bar
1, 316L
2, C276
3, PTFE
4, NBR
5, VITON
6, EPDM
7, PEEK
8, PTFE composite diaphragm
G: With pressure gauge
(MPa)
P: With pressure gauge
(psig/bar)
W: Without pressure gauge