LTY61 series liquidGas Regulators, Diaphragm or piston type pressure reducing structure, stable outlet pressure, suitable for suitable for liquids such as water, oil, organics and acids or alkalis. Can adopts panel-mount mounting,Stainless Steel Gas RegulatorsSuitable for laboratory, gas analysis testing, fluid control, petrochemical industry, test equipment etc..
● Diaphragm or piston type pressure reducing structure.
Body Thread: 1/2’’-1’’NPT(F).
● Built-in filter screen.
● Can be panel mounted.
| Max. Inlet Pressure: 3000psig |
| Outlet Pressure: 0~25, 0~50, 0~100, 0~125, 0~250psig |
| Safety Test Pressure: 1.5 times of max. Inlet pressure |
| Temperature Range: 100℃ to ＋260℃(above 260℃ consult technical) |
| Leak rate: Bubble test |
| Cv value: 2, 3.2, 5.1 |
| Body: 316L, 304, Brass, C276, TA2, stainless steel pTFE-lined |
| Bonnet: 304 |
| Diaphragm: NBR(nylon lined), Viton(nylon lined), 316L, PTFE |
| Valve Seat: PU, PTFE, PCTFE, PEEK, Vespel |
| Spring: 316L |
| Plug Stem: 316L |
| O-ring: NBR(nitrile rubber), EPDM rubber, viton, PTFE |
| Ordering GuideORDERING INFORMATION | ||||||||
| Series models | Body material | Body port layout | Inlet Pressure | Outlet Pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options |
| L | B | D | H | G | 02 | 02 | P | |
| LTY61 liquid gas regulator |
L:316L B:Brass S:304 C:C276 T:TA2 CF: PTFE-lined |
A B G J M |
F:500psig E:3000psig |
G:0-250psig H:0-125psig I:0-100psig K:0-50psig L:0-25psig HTY61 outlet pressure: M:0-500psig N:0-1000psig P:0-1500psig Q:0-3000psig |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
04:1/2NPT(F) 06:3/4NPT(F) 08:1"NPT(F) 09:1"NPT(M) Other fittings available |
04:1/2NPT(F) 04:3/4NPT(F) 08:1"NPT(F) 09:1"NPT(M) Other fittings available |
P: Panel-mount mounting R:Relief Valves ZR: Self-venting SR: Self-venting with recovery port |
