Air operatedGas RegulatorsAdjusts downstream pressure according to the control air pressure, controlling the downstream fluid pressure. Pressure can be set anywhere within the adjusting range, continuous control, achieving continuous, stepless downstream pressure regulation, supports remote, pneumatic and other control modes, downstream pressure is controlled by air pressure, may be equal, or varied at a set ratio, air control ratio 1: 1 to 1:100. Pneumatically controlled gas regulators are suitable for applications where fluid pressure requires remote or precise control. Etc. Liquid, can be panel mounted,Stainless Steel Gas RegulatorsSuitable for laboratory, petrochemical industry, gas analysis testing, fluid control, test equipment etc..
● Piston type pressure reducing structure.
Body Thread: 1/4"NPT(F), 3/8NPT(F).
● Built-in filter screen.
● Panel or wall mounting available.
● Can be controlled remotely, and other control modes including pneumatic control.
● Compressed air pressure 0-7bar.
● Sensitive operation, high precision.
| Max. Inlet Pressure: Stainless steel 10000psig, brass 6000psig |
| Outlet Pressure: 0~500, 0~800, 10~1500, 15~3000, 25~4000, 50~6000, 200~10000psig(custom) |
| Safety Test Pressure: 1.5 times of max. Inlet pressure |
| Temperature Range: -40℃ to ＋100℃(above 100℃ can be custom) |
| ➣ leakage rate: Foam test |
| Cv value: 0.06, 0.08, 0.12 |
| ➣ air control ratio 1:1 to 1:100 |
| ➣ linearity: Within ±5% F.S |
| ➣ sensitivity: Within ±3% F.S |
| ➣ accuracy: Within ±5% F.S |
| Body: 316L, 304, Brass, stainless steel pTFE-lined, 17-4, 17-7, c276, TA2, Monel |
| Bonnet: 304 |
| Valve Seat: PCTFE, PTFE, PEEK, Vespel |
| Spring: 316L |
| Plug Stem: 316L, Stellite alloy, tungsten carbide |
| O-ring: PCTFE, Buna-N, Viton, PTFE, RPTFE |
| Ordering guide ORDERING INFORMATION | ||||||||
| Series models | Body material | Body port layout | Inlet Pressure | Outlet Pressure | Pressure Gauges | Inlet gas type | Outlet gas type | Options |
| L | B | B | D | G | 00 | 00 | P | |
|
ATY42 air operated gas regulator |
L:316L S:304 B:Brass CF: PTFE-lined 4:17-4 7:17-7 C:C276 T:TA2 M:Monel |
A B D G J M |
B:10000psig C:6000psig D:3000psig |
C:0-6000psig D:0-3000psig E:0-1500psig F:0-800psig G:0-500psig H:0-10000pig(can be custom) |
G: With pressure gauge (Mpa) P: With pressure gauge (psig/bar) W: Without pressure gauge |
00:1/4"NPT(F) 02:3/8"NPT(F) 10:1/8" tube fitting 11:1/4" tube fitting 12:3/8" tube fitting 15:6mm tube fitting 16:8mm tube fitting Other fittings available |
00:1/4"NPT(F) 02:3/8"NPT(F) 10:1/8" tube fitting 11:1/4" tube fitting 12:3/8" tube fitting 15:6mm tube fitting 16:8mm tube fitting Other fittings available |
P: Panel-mount mounting R:Relief Valves ZR: Self-venting SR: Self-venting with recovery port |
